Reading 195-62

TEXT OF READING 195-62 M 45 (Realtor; Mfgr. of Auto

Text

Date: 5/10/1929 Sex: M Age: 45 ReadingID: 994

Accessories) This psychic reading given by Edgar Cayce at his office, 115 West 35th Street, Virginia Beach, Va., this 10th day of May, 1929, in accordance with request made by self - Mr. [195].

[Edgar Cayce; Mrs. Cayce, Conductor; Gladys Davis, Steno. Mr. L. B. Cayce.]

Time of Reading 6:00 P. M. Eastern Standard Time. …, Ohio.

1. GC: [GD’s note - Suggestion as follows]: (Body and enquiring mind - and the sketch of motor assembly held in my hand. The changes in the chemical gravitation motor are as follows:

In the Drum - Gears and Pinions have been substituted for roller bearings and races at each end of drum.

Tank is to be made of a casting - in two halves lower half shows in Diagram with insert cast in semicircle, such that a square fixture carrying the pinion and bearing may be inserted. This casting gives perfect rigidity between shaft center at B and Pinion Shaft center at O.

In Diagram - C. D. is center line of containing tank. A is center of Drum in running position on line C. D. B the center of drum shaft is set on a line of center tank - C. D. - while point O center of inner pinion shaft is set 30 seconds above line C. D. figuring the 30 seconds as angle O A D.

To make angles 15’ and 15’ 30” respectively - the whole tank is set in a cradle and end of tank at D is elevated. This keeps angle at O always 30 seconds larger than angle at B. Tank is designed 21 inches in Diameter by 21-3/4 in length. A rachet on shaft of inner pinion at O has been designed such that pinion can only turn in desired direction - So at the start giving proper resistance to the expanding vibrations. You will answer questions that I will ask you.)

2. EC: Yes, we have the body, the enquiring mind, [195]. This we have had before. Also the drawing, or outline, that shows the change in the position of motor and the manner in which rigidity is to be exercised with same, and how the angles in the manner given should be that off center in the rotation from drum and axis of that impelling power through the section as marked in O.

3. Now, we would make the casting in that manner that will carry forward the idea in toto as is shown here; not varying one iota from that as is seen in the outline. Do that. Ready for questions.

4. (Q) Are the changes as outlined above such that will cause proper resistance in starting and running? (A) Such as will cause proper resistance in starting and running, in the expansion - for the angles are set aright.

5. (Q) The square fixture holding inner pinion whose center is at O is stationary. Would it be necessary to design same so that it could be adjusted nearer to B to help mesh gears? (A) Not necessary.

6. (Q) Are there any further suggestions as to changes or corrections to the changes as contemplated? (A) Make as is designed here, for the proper activity. Do that. We are through for the present.

Reports

Reports & Follow-up

R1. 5/28/29 [195]‘s letter to EC: ”…The motor is progressing slowly and it will be several weeks before the present model will be in shape to try. This time we should be near to success.

“Am working on some new models also - writing up some explanation of space, and when I have this studied out I will want a reading on them both at the same time. It seems that when one works out to his best ability his theory on a subject the Forces more readily give assistance through the readings on the subject in question…” [He reported on [5656]. See 5656-2.]

R2. 6/5/29 [195]‘s letter to EC: ”…As for the motor, we are working real hard on same and, like all other experimental jobs, we are at times disappointed due to delays occasioned by labor difficulties. We hope to make some sort of a test within two weeks, and when the test is made we surely hope it is successful.

“A friend today advised that a Yale professor had built some gravity motor that was now being run at the Ohio State College and being tested. I talked with [900] today when he phoned me and he was upset at the news. I therefore wrote him and told him to have faith in the forces guiding us, and the educational work, and not to let such a thought enter his head. It will surely be a big day when this is over and patents secured…”

R3. 6/11/29 He obtained 195-63 on motor.

Background

Background

B1. 5/6/29 He obtained 195-61 giving further advice on [4666] motor.

B2. 5/8/29 He submitted further questions, saying: ”…The motors designed so far have been too flimsy such that they give, and no expansion of vibration can be controlled. I tried to get away from building a cast iron container but have to do so - and before I get this made up I wish you would take a Check reading on same - and ask the questions as I ask them. While I know the law fairly well and feel sure that present design will do what is expected, I would like to get corrections if any, or any suggestions before letting contract for the pattern from which castings are to be made… When you get any information please wire me collect - and tell me if my design is correct or if any suggested changes or improvements. Hope you can crowd this in right away…”

Mentioned Entities

Ohio, Vibration, Gertrude Cayce, Gladys Davis, Law of Moses, Virginia Beach

Source: The Complete Edgar Cayce Readings, A.R.E. CD-ROM (2006). Reading 195-62, ReadingID 994.